Publications
Export 169 results:
Author Title [ Type
Filters: Author is Benton H. Calhoun [Clear All Filters]
“Characterizing and Modeling Minimum Energy Operation for Subthreshold Circuits”, in International Symposium on Low Power Electronics and Design, 2004, pp. 90-95.
, “Combining SRAM Read/Write Assist Techniques for Near/Sub-Threshold Voltage Operation”, in 6th Asia Symposium on Quality Electronic Design (ASQED 2015), Kuala Lumpur, Malaysia, 2015.
, “A Crystal-Less BLE Transmitter with -86dBm Frequency-Hopping Back-Channel WRX and Over-the-Air Clock Recovery from a GFSK-Modulated BLE Packet”, in 2020 IEEE International Solid-State Circuits Conference (ISSCC), 2020.
, “Dark vs. Dim Silicon and Near-Threshold Computing”, in Dark Silicon Workshop (DaSi), 2012.
, “Design Considerations for Next Generation Wireless Power-Aware Microsensor Nodes”, in International Conference on VLSI Design, 2004, pp. 361-367.
, “Design Methodology for Fine-Grained Leakage Control in MTCMOS”, in International Symposium on Low Power Electronics and Design (ISLPED), 2003, pp. 104-109.
, “Device Sizing for Minimum Energy Operation in Subthreshold Circuits”, in Custom Integrated Circuits Conference (CICC), 2004, pp. 95-98.
, “A Digital Dynamic Write Margin Sensor for Low Power Read/Write Operations in 28nm SRAM”, in ISLPED, 2014.
, “A Double Pumped Single-Line-Cache SRAM Architecture for Ultra-low Energy IoT and Machine Learning Applications”, in 32nd International Conference on VLSI Design, 2019.
, “Energy-Efficient Link Layer for Wireless Microsensor Networks”, in IEEE Computer Society Workshop on VLSI, 2001, pp. 16-21.
, “An Energy-Efficient Near/Sub-Threshold FPGA Interconnect Architecture Using Dynamic Voltage Scaling and Power-Gating”, in International Conference on Field-Programmable Technology (ICFPT 2016), Xi’an, China, 2016.
, “An Enhanced Adaptive Canary System for SRAM Standby Power Reduction”, in TECHCON, 2008.
, “Exploiting Dynamically Changing Parallelism with a Reconfigurable Array of Homogeneous Sub-cores”, in TECHCON, 2010.
, “FAR: A 4.12uW Ferro-electric Auto-Recovery for Battery-less BSN SoCs”, in 2017 IEEE Biomedical Circuits and Systems Conference (BioCAS), Turin, Italy, 2017.
, “Flow-induced Vibrations of Pinniped Vibrissae: Effects of Angular Orientation and Implications for Hydrodynamic Reception”, in Conference on the Biology of Marine Mammals, 2011.
, “A Fully Integrated, Custom End-to-End PPG Sensing System for Ultra-Low Power Wearables”, in 2025 IEEE International Symposium on Circuits and Systems (ISCAS), In Press.
, “Graph Coloring using Coupled Oscillator-based Dynamical Systems”, in 2021 IEEE International Symposium on Circuits and Systems (ISCAS), 2021.
, “Hold Time Closure for Subthreshold Circuits Using a Two-Phase, Latch Based Timing Method”, in S3S Conference, Monterey, California, 2013.
, “Improving Dynamic Leakage Suppression Logic with Forward Body Bias in 65nm CMOS”, in IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), 2019.
, “Improving Reliability and Energy Requirements of Memory in Body Sensor Networks.”, in International Conference on VLSI Design, Kolkata, India, 2016.
, “An Integrated 2.4GHz -91.5dBm Sensitivity Within-Packet Duty-Cycled Wake-Up Receiver Achieving 2μW at 100ms Latency”, in IEEE International Solid-State Circuits Conference (ISSCC), San Francisco, CA (*Equally-Credited Authors), 2021.
, “ISPI: A 2-Wire Improved Serial Peripheral Interface with Automatic Routing Algorithm for 2-D In-Textile Distributed Computing and Storage Systems”, in 2025 IEEE Custom Integrated Circuits Conference (CICC) , In Press.
, “MemGen: An Open-Source Framework for Autonomous Generation of Memory Macros”, in IEEE Custom Integrated Circuits Conference (CICC), 2021.
kamineni2021.pdf (9.26 MB)
, 
“Micropower Wireless Sensors”, in NSTI Nanotech, 2006, vol. 3, pp. 459-462.
, “Minimizing Offset for Latching Voltage-Mode Sense Amplifiers for Sub-threshold Operation”, in International Symposium on Quality Electronic Design, 2008, pp. 127-132.
,