Robust Low Power VLSI

VLSI Design Group

Search This Site

Publications

Export 152 results:

Filters: Author is Benton H. Calhoun [Clear All Filters]

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

M

C. J. Lukas, Yahya, F. B., and Calhoun, B. H., “Modeling Trans-threshold Correlations for Reducing Functional Test Time in Ultra-Low Power Systems”, in 2017 IEEE International Test Conference (ITC), Fort Worth, TX, USA, 2017.

S. Z. Ahmed, Tan, Y., Truesdell, D. S., Calhoun, B. H., and Ghosh, A., “Modeling tunnel field effect transistors-from interface chemistry to non-idealities to circuit level performance”, Journal of Applied Physics, 2018.

J. Qi, Wang, J., Calhoun, B. H., and Stan, M., “MSN: Memory Sensor for NBTI”, in Techcon, 2009.

A. Dissanayake, Bishop, H. L., Moody, J., Muhlbauer, H., Calhoun, B. H., and Bowers, S. M., “A Multichannel, MEMS-less -99dBm 260nW Bit-level Duty Cycled Wakeup Receiver”, in 2020 IEEE Symposium on VLSI Circuits (VLSI), 2020.

A. Banerjee, Kamineni, S., and Calhoun, B. H., “Multiple Combined Write-Read Peripheral Assists in 6T FinFET SRAMs for Low-VMIN IoT and Cognitive Applications”, Proceedings of the International Symposium on Low Power Electronics and Design (ISLPED). IEEE, 2018.

N

D. S. Truesdell, Liu, X., Breiholz, J., Gupta, S., Li, S., and Calhoun, B. H., “NanoWattch: A Self-Powered 3-nW RISC-V SoC Operable from 160mV Photovoltaic Input with Integrated Temperature Sensing and Adaptive Performance Scaling”, in 2022 IEEE Symposium on VLSI Circuits (VLSI), (Equally-Credited Authors), 2022.

NanoWattch A Self-Powered 3-nW RISC-V SoC Operable from 160mV Photovoltaic Input with Integrated Temperature Sensing and Adaptive Performance Scaling.pdf (11.11 MB)

O

K. Craig, Shakhsheer, Y., and Calhoun, B. H., “Optimal Power Switch Design for Dynamic Voltage Scaling from High Performance to Subthreshold Operation”, in International Symposium on Low Power Electronics and Design, 2012.

K. Craig, Shakhsheer, Y., Khanna, S., and Calhoun, B. H., “Optimal Power Switch Design for Panoptic Dynamic Voltage Scaling Enabling Subthreshold Operation”, in Subthreshold Microelectronics Conference, 2011.

B. H. Calhoun and Rabaey, J., “Optimizing Power @ Design Time – Memory”, in Low Power Design Essentials, J. Rabaey, Ed. 2009.

B. H. Calhoun and Rabaey, J., “Optimizing Power @ Standby – Memory”, in Low Power Design Essentials, J. Rabaey, Ed. 2009.

P

M. Putic, Di, L., Calhoun, B. H., and Lach, andJohn, “Panoptic DVS: A Fine-Grained Dynamic Voltage Scaling Framework for Energy Scalable CMOS Design”, in International Conference on Computer Design (ICCD), 2009, pp. 491-497.

S. Li, Roy, A., and Calhoun, B. H., “A Piezoelectric Energy-Harvesting System with Parallel-SSHI Rectifier and Integrated MPPT Achieving 417% Energy-Extraction Improvement and 97% Tracking Efficiency”, in 2019 Symposium on VLSI Circuits, Kyoto, Japan, 2019.

S. Li, Roy, A., and Calhoun, B. H., “A Piezoelectric Energy-Harvesting System with Parallel-SSHI Rectifier and Integrated Maximum-Power-Point Tracking”, IEEE Solid-State Circuits Letters (SSCL), Special Issue on VLSI (invited paper), 2019.

B. H. Calhoun, ,, and Chandrakasan, A., “Power Gating and Dynamic Voltage Scaling”, in Leakage in Nanometer Technologies, S. Narendra and Chandrakasan, A., Eds. Springer, 2006, pp. 41-75.

L. Di, Putic, M., Lach, J., and Calhoun, B. H., “Power Switch Characterization for Fine-Grained Dynamic Voltage Scaling”, in International Conference on Computer Design, pages 605-611, 2008.

A. Klinefelter, Zhang, Y., Otis, B., and Calhoun, B. H., “A Programmable 34 nW/Channel Sub-Threshold Signal Band Power Extractor on a Body Sensor Node SoC”, Circuits and Systems II: Express Briefs, IEEE Transactions on, vol. 59, p. 941, 2012.

K. Craig, Shakhsheer, Y., Khanna, S., Arrabi, S., Lach, J., Calhoun, B. H., and Kosonocky, S., “A Programmable Resistive Power Grid for Post-Fabrication Flexibility and Energy Tradeoffs”, in International Symposium on Low Power Electronics and Design, 2012.

R

A. Singhee, Wang, J., Calhoun, B. H., and Rutenbar, R. A., “Recursive Statistical Blockade: An Enhanced Technique for Rare Event Simulation with Application to SRAM Circuit Design”, in International Conference on VLSI Design, India, 2008, pp. 131-136.

L. Szafaryn, Chen, J., Calhoun, B. H., Lach, J., Skadron, K., and Meyer, B. H., “Reducing the Cost of Safety-Critical Systems with On-Demand Redundancy”, in SRC Techcon, 2012.

S

X. Liu, Truesdell, D. S., Faruqe, O., Parameswaran, L., Rickley, M., Kopanski, A., Cantley, L., Coon, A., Bernasconi, M., Wang, T., and Calhoun, B. H., “A Self-Powered SoC with Distributed Cooperative Energy Harvesting and Multi-Chip Power Management for System-in-Fiber”, in IEEE International Solid-State Circuits Conference (ISSCC), 2023.

S. Khanna and Calhoun, B. H., “Serial Sub-threshold Circuits for Ultra-Low-Power Systems”, in International Symposium on Low Power Electronics and Design, 2009.

D. S. Truesdell and Calhoun, B. H., “A Single-Supply 6-Transistor Voltage Level Converter Design Reaching 8.18-fJ/Transition at 0.3-1.2-V Range or 44-fW Leakage at 0.8-2.5-V Range”, IEEE Solid-State Circuits Letters (SSCL), 2020.

A Single-Supply 6-Transistor Voltage Level Converter Design Reaching 8.18-fJ_Transition at 0.3-1.2-V Range or 44-fW Leakage at 0.8-2.5-V Range.pdf (1.06 MB)

H. N. Patel, Mann, R. W., and Calhoun, B. H., “Soft Errors: Reliability Challenges in Energy-Constrained ULP Body Sensor Networks Applications”, in 23rd IEEE International Symposium on On-Line Testing and Robust System Design, Thessaloniki, Greece, 2017.

P. Beshay, Bolus, J., Blalock, T., Chandra, V., and Calhoun, B. H., “SRAM Sense Amplifier Offset Cancellation Using BTI Stress”, in Subthreshold Microelectronics Conference, 2012.

J. Qi, Wang, J., Calhoun, B. H., and Stan, M., “SRAM-Based NBTI/PBTI Sensor System Design”, in Design Automation Conference (DAC), San Diego, CA, 2010, pp. 849-852.

Pages