Publications
“A Sub-0.5V Lattice-Based Public-Key Encryption Scheme for RFID Platforms in 130nm”. 2011 Workshop on RFID Security, 2011.
, , , “What is a Body Sensor Network?”, ACM / SIGDA Newsletter, vol. 41, 2011.
, “An Ultra-Low Energy Subthreshold SRAM Bitcell for Energy Constrained Biomedical Applications”, Journal of Low Power Electronics and Applications (JLPEA), vol. 4, p. 19, 2014.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), 2011.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), vol. 20, p. 12, 2012.
, “A Sub-threshold 8T SRAM Macro with 12.29nW/KB Standby Power and 6.24 pJ/access for Battery-Less IoT SoCs”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
, “Non-Random Device Mismatch Considerations in Nanoscale SRAM”, IEEE Transactions of VLSI Systems (TVLSI), 2011.
, “Minimum Supply Voltage and Yield Estimation for Large SRAMs Under Parametric Variations”, Transactions on VLSI Systems (TVLSI), 2011.
, “Impact of circuit assist methods on margin and performance in 6T SRAM”, Journal of Solid State Electronics, vol. 54, pp. 1398-1407, 2010.
, “Development of an artificial sensor for hydrodynamic detection inspired by a seal’s whisker array”, Bioinspiration and Biomimetics, 2016.
, “A Design and Theoretical Analysis of a 145 mV to 1.2 V Single-Ended Level Converter Circuit for Ultra-Low Power Low Voltage ICs”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
, “Body Area Sensor Networks: Challenges and Opportunities”, Computer, vol. 42, pp. 58–65, 2009.
, “Analyzing Sub-Threshold Bitcell Topologies and the Effects of Assist Methods on SRAM VMIN”, Journal of Low Power Electronics and Applications (JLPEA), vol. 2, p. 12, 2012.
, “Analyzing Sub-Threshold Bitcell Topologies and the Effects of Assist Methods on SRAM Vmin”, Journal of Low Power Electronics and Applications, 2012.
, “39 fJ/bit On-Chip Identification of Wireless Sensors Based on Manufacturing Variation”, Journal of Low Power Electronics and Applications (JLPEA), vol. 4, p. 16, 2014.
, “A 36nW, 7 ppm/oC Fully On-Chip Clock Source System for Ultra-Low Power Applications”, Journal of Low Power Electronics and Applications (JLPEA), vol. 6, 2016.
, “A 1.5nW, 32.768kHz XTAL Oscillator Operational from 0.3V Supply”, IEEE Journal of Solid-State Circuits (JSSC), vol. 51, 2016.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting with 220mV Cold-Start and -14.5dBm, 915MHz RF Kick-Start”, IEEE Journal of Solid-State Circuits (JSSC), vol. 50, pp. 1820-1832, 2015.
, “A 0.2 V, 23 nW CMOS Temperature Sensor for Ultra-Low-Power IoT Applications”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
, “A Custom Processor for Node and Power Management of a Battery-less Body Sensor Node in 130nm CMOS”, Custom Integrated Circuits Conference. San Jose, 2012.
, , “Virtual Prototyper (ViPro): An Early Design Space Exploration and Optimization Tool for SRAM Designers”, in Design Automation Conference (DAC), 2010, pp. 138-143.
, “Ultra-Low Power Wireless SoCs Enabling a Batteryless IoT”, in HOT Chips, 2015.
,