Publications
Export 21 results:
[ Author
Filters: First Letter Of Last Name is S [Clear All Filters]
“A Custom Processor for Node and Power Management of a Battery-less Body Sensor Node in 130nm CMOS”, Custom Integrated Circuits Conference. San Jose, 2012.
, “A 90nm Data Flow Processor Demonstrating Fine Grained DVS for Energy Efficient Operation from 0.25V to 1.2V”, in Custom Integrated Circuits Conference, San Jose, 2011.
, “Ultra Low Power Circuits and Systems for Self Powered Wireless Sensors”, in GOMACTech, 2015.
, “A 184 nW, -78.3 dBm Sensitivity Antenna-Coupled Supply, Temperature, and Interference-Robust Wake-up Receiver at 4.9 GHz”, IEEE Transactions on Microwave Theory and Techniques, 2022.
, “Energy-Efficient Link Layer for Wireless Microsensor Networks”, in IEEE Computer Society Workshop on VLSI, 2001, pp. 16-21.
, “Design Considerations for Energy-Efficient Radios in Wireless Microsensor Networks”, Journal of VLSI Signal Processing, vol. 37, pp. 77-94, 2004.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting with 220mV Cold-Start and -14.5dBm, 915MHz RF Kick-Start”, IEEE Journal of Solid-State Circuits (JSSC), vol. 50, pp. 1820-1832, 2015.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric Energy Harvesting”, in IEEE Custom Integrated Circuits Conference (CICC), 2014.
, , “A 1.5nW, 32.768kHz XTAL Oscillator Operational from 0.3V Supply”, IEEE Journal of Solid-State Circuits (JSSC), vol. 51, 2016.
, “A 150nW, 5ppm/oC, 100kHz On-Chip Clock Source for Ultra Low Power SoCs”, in Custom Integrated Circuits Conference, San Jose, 2012.
, “A 1.2μW SIMO Energy Harvesting and Power Management Unit with Constant Peak Inductor Current Control Achieving 83-92% Efficiency Across Wide Input and Output Voltages”, in Symposium on VLSI Circuits, 2014.
, “Modeling DC-DC Converter Efficiency and Power Management in Ultra Low Power Systems”, in Subthreshold Microelectronics Conference, 2012.
, “A Charge Pump Based Receiver Circuit for a Voltage Scaled Interconnect”, in International Symposium on Low Power Electronics and Design, 2012.
, “A 50nW, 100kbps Clock/Data Recovery Circuit in an FSK RF Receiver on a Body Sensor Node”, in VLSI Design Conference, 2013.
, “A 32nW Bandgap Reference Voltage Operational from 0.5V Supply for Ultra-low Power Systems”, in EEE International Solid-State Circuits Conference (ISSCC), 2015.
, “A DC-DC Converter Efficiency Model for System Level Analysis in Ultra Low Power Applications”, 2013.
, “Recursive Statistical Blockade: An Enhanced Technique for Rare Event Simulation with Application to SRAM Circuit Design”, in International Conference on VLSI Design, India, 2008, pp. 131-136.
, “Fast Algorithm for Clock Grid Simulation”, in European Solid State Circuits Conference (ESSCIRC), 2002, pp. 771-774.
, “A Capacitance-Based Whisker-like Artificial Sensor for Fluid Motion Sensing”, in IEEE Sensors, 2010.
, “Reducing the Cost of Safety-Critical Systems with On-Demand Redundancy”, in SRC Techcon, 2012.
,