Publications
Export 23 results:
Author Title Type [ Year] Filters: First Letter Of Last Name is Z [Clear All Filters]
“A -102 dBm Sensitivity Multi-Channel Heterodyne Wake-Up Receiver with Integrated ADPLL”, IEEE Open Journal of the Solid-State Circuits Society, 2024.
, “A -102 dBm Sensitivity Multi-Channel Heterodyne Wake-Up Receiver with Integrated ADPLL”, IEEE Open Journal of the Solid-State Circuits Society, 2024.
, “A -102dBm Sensitivity, 2.2µA Packet-Level-Duty-cycled Wake-Up Receiver with ADPLL achieving -30dB SIR”, in IEEE Custom Integrated Circuits Conference (CICC), 2023.
, “A -102dBm Sensitivity, 2.2µA Packet-Level-Duty-cycled Wake-Up Receiver with ADPLL achieving -30dB SIR”, in IEEE Custom Integrated Circuits Conference (CICC), 2023.
, “A 184 nW, -78.3 dBm Sensitivity Antenna-Coupled Supply, Temperature, and Interference-Robust Wake-up Receiver at 4.9 GHz”, IEEE Transactions on Microwave Theory and Techniques, 2022.
, “A 366 nW, -74.5 dBm Sensitivity Antenna-Coupled Wakeup Receiver at 4.9 GHz with Integrated Voltage Regulation and References”, in IEEE MTT-S International Microwave Symposium (IMS), Atlanta, GA, 2021.
, ,
“A 6.45 μW Self-Powered IoT SoC with Integrated Energy-Harvesting Power Management and ULP Asymmetric Radios”, in ISSCC, San Francisco, CA, 2015.
, “Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing”, Proceedings of the IEEE, vol. 103, pp. 665-681, 2015.
, “Fast, Accurate Variation-Aware Path Timing Computation for Sub-threshold Circuits”, in International Symposium on Quality Electronic Design (ISQED), 2014.
, “A 0.6V 8 pJ/write Non-Volatile CBRAM Macro Embedded in a Body Sensor Node for Ultra Low Energy Applications”, in Symposium on VLSI Circuits, 2013.
, “A Batteryless 19 uW MICS/ISM-Band Energy Harvesting Body Sensor Node SoC for ExG Applications”, Journal of Solid State Circuits, vol. 48, pp. 199-213, 2013.
, “A Batteryless 19 uW MICS/ISM-Band Energy Harvesting Body Sensor Node SoC for ExG Applications”, Journal of Solid State Circuits, vol. 48, pp. 199-213, 2013.
, “Hold Time Closure for Subthreshold Circuits Using a Two-Phase, Latch Based Timing Method”, in S3S Conference, Monterey, California, 2013.
, “A Batteryless 19uW MICS/ISM-Band Energy Harvesting Body Area Sensor Node SoC”, in ISSCC, San Francisco, 2012.
, “A Batteryless 19uW MICS/ISM-Band Energy Harvesting Body Area Sensor Node SoC”, in ISSCC, San Francisco, 2012.
, “A Custom Processor for Node and Power Management of a Battery-less Body Sensor Node in 130nm CMOS”, Custom Integrated Circuits Conference. San Jose, 2012.
, “A Programmable 34 nW/Channel Sub-Threshold Signal Band Power Extractor on a Body Sensor Node SoC”, Circuits and Systems II: Express Briefs, IEEE Transactions on, vol. 59, p. 941, 2012.
, “Body Sensor Networks: A Holistic Approach From Silicon to Users”, IEEE Proceedings, 2011.
, , “Energy Efficient Design for Body Sensor Nodes”, Journal of Low Power Electronics and Applications, 2011.
, “A Sub-Threshold FPGA: Energy-Efficient Reconfigurable Logic”, in GOMAC Tech, 2011.
, “System Design Principles Combining Sub-threshold Circuits and Architectures with Energy Scavening Mechanisms”, in International Symposium on Circuits and Systems (ISCAS), Paris, France, 2010, pp. 269-272.
,