Publications
Export 45 results:
Author Title [ Type
] Year Filters: First Letter Of Last Name is M [Clear All Filters]
, “Using synchronized oscillators to compute the maximum independent set”, Nature Communications, 2020.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), vol. 20, p. 12, 2012.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), 2011.
, “Non-Random Device Mismatch Considerations in Nanoscale SRAM”, IEEE Transactions of VLSI Systems (TVLSI), 2011.
, “Nanowatt-Level Wakeup Receiver Front Ends Using MEMS Resonators for Impedance Transformation”, IEEE Transactions on Microwave Theory and Techniques, 2019.
, “Nanowatt-Level Wakeup Receiver Front Ends Using MEMS Resonators for Impedance Transformation”, IEEE Transactions on Microwave Theory and Techniques, 2019.
, “Interference Robust Detector-First Near-Zero Power Wake-Up Receiver”, IEEE Journal of Solid-State Circuits, 2019.
, “Impact of circuit assist methods on margin and performance in 6T SRAM”, Journal of Solid State Electronics, vol. 54, pp. 1398-1407, 2010.
, “A Highly Re-configurable Bit-level Duty Cycled TRF Receiver Achieving -106 dBm Sensitivity and 33 nW Average Power Consumption”, IEEE Solid-State Circuits Letters (SSCL), Special Issue on VLSI (invited paper), 2019.
, “Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing”, Proceedings of the IEEE, vol. 103, pp. 665-681, 2015.
, “Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing”, Proceedings of the IEEE, vol. 103, pp. 665-681, 2015.
, “Effect of Angle on Flow-Induced Vibrations of Pinniped Vibrissae”, PLOS One, vol. Vol. 8, No. 7, 2013.
, “Effect of Angle on Flow-Induced Vibrations of Pinniped Vibrissae”, PLOS One, vol. Vol. 8, No. 7, 2013.
, “Effect of Angle on Flow-Induced Vibrations of Pinniped Vibrissae”, PLOS One, vol. Vol. 8, No. 7, 2013.
, “Digital Circuit Design Challenges and Opportunities in the Era of Nanoscale CMOS”, Proceedings of the IEEE (Special Issue on Integrated Electronics: Beyond Moore’s Law), vol. 96, pp. 343-365, 2008.
, “Development of an artificial sensor for hydrodynamic detection inspired by a seal’s whisker array”, Bioinspiration and Biomimetics, 2016.
, “A 6–140-nW 11 Hz–8.2-kHz DVFS RISC-V Microprocessor Using Scalable Dynamic Leakage-Suppression Logic”, IEEE Solid-State Circuits Letters (SSCL), 2019.
A 6–140-nW 11 Hz–8.2-kHz DVFS RISC-V Microprocessor Using Scalable Dynamic Leakage-Suppression Logic (1.63 MB)
A 6–140-nW 11 Hz–8.2-kHz DVFS RISC-V Microprocessor Using Scalable Dynamic Leakage-Suppression Logic (1.63 MB), “Virtual Prototyper (ViPro): An Early Design Space Exploration and Optimization Tool for SRAM Designers”, in Design Automation Conference (DAC), 2010, pp. 138-143.
, “A Technology-Agnostic Simulation Environment (TASE) for Iterative Custom IC Design across Processes”, in ICCD, 2009, pp. 523-528.
, “Sub-threshold Circuit Design with Shrinking CMOS Devices”, in International Symposium on Circuits and Systems, 2009.
, “An SRAM Prototyping Tool for Rapid Sub-32nm Design Exploration and Optimization”, in TECHCON, 2009.
, “Soft Errors: Reliability Challenges in Energy-Constrained ULP Body Sensor Networks Applications”, in 23rd IEEE International Symposium on On-Line Testing and Robust System Design, Thessaloniki, Greece, 2017.
, “Reducing the Cost of Safety-Critical Systems with On-Demand Redundancy”, in SRC Techcon, 2012.
, “Reducing the Cost of Redundant Execution in Safety-Critical Systems using Relaxed Dedication”, in Design Automation and Test in Europe (DATE), 2011.