Publications
] , “A 0.2 V, 23 nW CMOS Temperature Sensor for Ultra-Low-Power IoT Applications”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
, “A 0.38 pJ/bit 1.24 nW Chip-to-Chip Serial Link for Ultra-Low Power Systems”, in International Symposium on Circuits and Systems (ISCAS), Lisbon, 2015.
, “A 0.5 V 68 nW ECG Monitoring Analog Front-End for Arrhythmia Diagnosis”, Journal of Low Power Electronics and Applications (JLPEA), 2018.
, “A 0.5V 560-kHz 18.8-fJ/Cycle On-Chip Oscillator with 96.1-ppm/°C Steady-State Stability Using a Duty-Cycled Digital Frequency-Locked Loop”, IEEE Journal of Solid-State Circuits, 2021.
A 0.5-V 560-kHz 18.8-fJ_Cycle On-Chip Oscillator With 96.1ppm_C Steady-State Stability Using a Duty-Cycled Digital Frequency-Locked Loop.pdf (2.95 MB)
A 0.5-V 560-kHz 18.8-fJ_Cycle On-Chip Oscillator With 96.1ppm_C Steady-State Stability Using a Duty-Cycled Digital Frequency-Locked Loop.pdf (2.95 MB), “A 0.5V 560kHz 18.8fJ/Cycle Ultra-Low Energy Oscillator in 65nm CMOS with 96.1ppm/°C Stability Using a Duty-Cycled Digital Frequency-Locked Loop”, in 2020 IEEE Symposium on VLSI Circuits (VLSI), 2020. A 0.5V 560kHz 18.8fJ_Cycle Ultra-Low Energy Oscillator in 65nm CMOS with 96.1ppm_C Stability Using a Duty-Cycled Frequency-Locked Loop.pdf (2.67 MB)
A 0.5V 560kHz 18.8fJ_Cycle Ultra-Low Energy Oscillator in 65nm CMOS with 96.1ppm_C Stability Using a Duty-Cycled Frequency-Locked Loop.pdf (2.67 MB), “A 0.6-V 44.6-fJ/Cycle Energy-Optimized Frequency-Locked Loop in 65-nm CMOS With 20.3-ppm/°C Stability”, IEEE Solid-State Circuits Letters (SSCL), 2019. A 0.6-V 44.6-fJ Cycle Energy-Optimized Frequency-Locked Loop in 65-nm CMOS With 20.3-ppm C Stability.pdf (1.64 MB)
A 0.6-V 44.6-fJ Cycle Energy-Optimized Frequency-Locked Loop in 65-nm CMOS With 20.3-ppm C Stability.pdf (1.64 MB), “A 0.6V 785-nW Multimodal Sensor Interface IC for Ozone Pollutant Sensing and Correlated Cardiovascular Disease Monitoring”, IEEE Journal of Solid-State Circuits, 2021.
, “A 0.6V 8 pJ/write Non-Volatile CBRAM Macro Embedded in a Body Sensor Node for Ultra Low Energy Applications”, in Symposium on VLSI Circuits, 2013.
, “A -102 dBm Sensitivity Multi-Channel Heterodyne Wake-Up Receiver with Integrated ADPLL”, IEEE Open Journal of the Solid-State Circuits Society, 2024.
, “A 1.02 μW Battery-Less, Continuous Sensing and Post-Processing SiP for Wearable Applications”, IEEE Transactions on Biomedical Circuits and Systems, 2019. 08625544.pdf (3.22 MB)
08625544.pdf (3.22 MB), “A -102dBm Sensitivity, 2.2µA Packet-Level-Duty-cycled Wake-Up Receiver with ADPLL achieving -30dB SIR”, in IEEE Custom Integrated Circuits Conference (CICC), 2023.
, “A -106dBm 33nW Bit-Level Duty-Cycled Tuned RF Wake-up Receiver”, in 2019 Symposium on VLSI Circuits, Kyoto, Japan, 2019.
, “A -108dBm Sensitivity, -28dB SIR, 130nW to 41μW, Digitally Reconfigurable Bit-Level Duty-Cycled Wakeup and Data Receiver”, in IEEE Custom Integrated Circuits Conference (CICC), 2020.
, “A 10-Channel, 1.2 µW, Reconfigurable Capacitanceto-Digital Converter for Low-Power, Wearable Healthcare Applications”, in 2023 IEEE Biomedical Circuits and Systems Conference, 2023.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting with 220mV Cold-Start and -14.5dBm, 915MHz RF Kick-Start”, IEEE Journal of Solid-State Circuits (JSSC), vol. 50, pp. 1820-1832, 2015.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric Energy Harvesting”, in IEEE Custom Integrated Circuits Conference (CICC), 2014.
, “A 1.2μW SIMO Energy Harvesting and Power Management Unit with Constant Peak Inductor Current Control Achieving 83-92% Efficiency Across Wide Input and Output Voltages”, in Symposium on VLSI Circuits, 2014.
, “A 130nm Canary SRAM for SRAM Dynamic Write VMIN Tracking across Voltage, Frequency, and Temperature Variations”, in Custom Integrated Circuits Conference (CICC), San Jose, CA, 2015.
, “A 1.3μW, 5pJ/cycle sub-threshold MSP430 processor in 90nm xLP FDSOI for energy-efficient IoT applications”, in International Symposium on Quality Electronic Design (ISQED), Santa Clara, CA, 2016.
, “A 145mV to 1.2V Single Ended Level Converter Circuit for Ultra-Low Power Low Voltage ICs”, in IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), 2015.
, “A 150nW, 5ppm/oC, 100kHz On-Chip Clock Source for Ultra Low Power SoCs”, in Custom Integrated Circuits Conference, San Jose, 2012.
, “A 1.5nW, 32.768kHz XTAL Oscillator Operational from 0.3V Supply”, IEEE Journal of Solid-State Circuits (JSSC), vol. 51, 2016.
, “A 184 nW, -78.3 dBm Sensitivity Antenna-Coupled Supply, Temperature, and Interference-Robust Wake-up Receiver at 4.9 GHz”, IEEE Transactions on Microwave Theory and Techniques, 2022.
, “A 194nW Energy-Performance-Aware IoT SoC Employing a 5.2nW 92.6% Peak Efficiency Power Management Unit for System Performance Scaling, Fast DVFS and Energy Minimization”, in IEEE International Solid-State Circuits Conference (ISSCC), 2022. A 194nW Energy-Performance-Aware IoT SoC Employing a 5.2nW 92.6% Peak Efficiency Power Management Unit for System Performance Scaling, Fa.pdf (4.4 MB)
A 194nW Energy-Performance-Aware IoT SoC Employing a 5.2nW 92.6% Peak Efficiency Power Management Unit for System Performance Scaling, Fa.pdf (4.4 MB), “A 1pJ/Bit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks”, in 2023 IEEE Biomedical Circuits and Systems Conference, 2023. A 1pJbit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks.pdf (2.54 MB)
A 1pJbit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks.pdf (2.54 MB)