Publications
Export 80 results:
Author [ Title] Type Year Filters: First Letter Of Last Name is W [Clear All Filters]
“Ultra-Low Power Wireless SoCs Enabling a Batteryless IoT”, in HOT Chips, 2015.
, “Ultra-Dynamic Voltage Scaling for Energy Starved Electronics”, in Proc. of GOMAC Tech, 2007.
, “Ultra Low Power Circuits and Systems for Self Powered Wireless Sensors”, in GOMACTech, 2015.
, “Ultra Low Power Circuits and Systems for Self Powered Wireless Sensors”, in GOMACTech, 2015.
, “Two Fast Methods for Estimating the Minimum Standby Supply Voltage for Large SRAMs”, Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), vol. 29, pp. 1908-1920, 2010.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), 2011.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), 2011.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), vol. 20, p. 12, 2012.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), vol. 20, p. 12, 2012.
, “Techniques to Extend Canary-based Standby VDD Scaling for SRAMs to 45nm and Beyond”, IEEE Journal of Solid-State Circuits, vol. 43, pp. 2514-2523, 2008.
, “Sub-threshold Operation and Cross-Hierarchy Design for Ultra Low Power Wearable Sensors”, in International Symposium on Circuits and Systems, 2009.
, “Sub-threshold Design: The Challenges of Minimizing Circuit Energy”, in International Symposium on Low Power Electronics and Design (ISLPED), 2006, pp. 366-368.
, Sub-threshold Design for Ultra Low-Power Systems. Springer, 2006.
, “Sub-threshold Circuit Design with Shrinking CMOS Devices”, in International Symposium on Circuits and Systems, 2009.
, “Statistical Modeling for the Minimum Standby Supply Voltage of a Full SRAM Array”, in European Solid State Circuits Conference (ESSCIRC), 2007, pp. 400-403.
, “Standby Supply Voltage Minimization for Reliable Nanoscale SRAMs”, in Solid State Circuits Technologies, INTECH, 2010.
, “SRAM-Based NBTI/PBTI Sensor System Design”, in Design Automation Conference (DAC), San Diego, CA, 2010, pp. 849-852.
, “A Self-Powered SoC with Distributed Cooperative Energy Harvesting and Multi-Chip Power Management for System-in-Fiber”, in IEEE International Solid-State Circuits Conference (ISSCC), 2023. 15.1_A_Self-Powered_SoC_with_Distributed_Cooperative_Energy_Harvesting_and_Multi-Chip_Power_Management_for_System-in-Fiber.pdf (1.51 MB)
, “Recursive Statistical Blockade: An Enhanced Technique for Rare Event Simulation with Application to SRAM Circuit Design”, in International Conference on VLSI Design, India, 2008, pp. 131-136.
, “An Open-source Framework for Autonomous SoC Design with Analog Block Generation”, in 28th IFIP/IEEE International Conference on Very Large Scale Integration, Salt Lake City, UT, USA. (Nominated for Best Paper Award), 2020.
, “MSN: Memory Sensor for NBTI”, in Techcon, 2009.
, “Modeling Energy-Aware Photoplethysmography Hardware for Personalized Health Care Applications Across Skin Phototypes”, in IEEE Biomedical Circuits and Systems Conference (BioCAS), 2021.
, “Modeling and Sizing for Minimum Energy Operation in Sub-threshold Circuits”, IEEE Journal of Solid-State Circuits (JSSC), vol. 40, pp. 1778-1786, 2005.
, “Mobile Health Monitoring Through Biotelemetry”, in Bodynets, 2009.
, “Minimum Supply Voltage and Yield Estimation for Large SRAMs Under Parametric Variations”, Transactions on VLSI Systems (TVLSI), 2011.
,