Publications
Export 325 results:
Author Title Type [ Year] Filters: First Letter Of Last Name is C [Clear All Filters]
“Stepped Supply Voltage Switching for Energy Constrained Systems”, in ISQED, 2011.
, “A Sub-0.5V Lattice-Based Public-Key Encryption Scheme for RFID Platforms in 130nm”. 2011 Workshop on RFID Security, 2011.
, , “A Sub-Threshold FPGA: Energy-Efficient Reconfigurable Logic”, in GOMAC Tech, 2011.
, “A Sub-Threshold FPGA: Energy-Efficient Reconfigurable Logic”, in GOMAC Tech, 2011.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), 2011.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), 2011.
, “What is a Body Sensor Network?”, ACM / SIGDA Newsletter, vol. 41, 2011.
, “Asymmetric 6T SRAM with Two-phase Write and Split Bitline Differential Sensing for Low Voltage Operation”, in ISQED, 2010, pp. 139-146.
, “Asymmetric 6T SRAM with Two-phase Write and Split Bitline Differential Sensing for Low Voltage Operation”, in ISQED, 2010, pp. 139-146.
, “Can Subthreshold and Near-Threshold Circuits Go Mainstream?”, IEEE Micro, vol. 30, pp. 80-85, 2010.
, “A Capacitance-Based Whisker-like Artificial Sensor for Fluid Motion Sensing”, in IEEE Sensors, 2010.
, “An Energy-Efficient Subthreshold Level Converter in 130-nm CMOS”, IEEE Transactions on Circuits and Systems II, vol. 57, pp. 290-294, 2010.
, “Exploiting Dynamically Changing Parallelism with a Reconfigurable Array of Homogeneous Sub-cores”, in TECHCON, 2010.
, “Flexible Circuits and Architectures for Ultra Low Power”, Proceedings of the IEEE, vol. 98, pp. 267-282, 2010.
, “Impact of circuit assist methods on margin and performance in 6T SRAM”, Journal of Solid State Electronics, vol. 54, pp. 1398-1407, 2010.
, “Improving SRAM Vmin and Yield by Using Variation-Aware BTI Stress”, in CICC, San Jose, CA, 2010.
, “REESES: Rapid Efficient Energy Scalable ElectronicS”, in GOMAC Tech, 2010.
, “REESES: Rapid Efficient Energy Scalable ElectronicS”, in GOMAC Tech, 2010.
, “SRAM-Based NBTI/PBTI Sensor System Design”, in Design Automation Conference (DAC), San Diego, CA, 2010, pp. 849-852.
, “Standby Supply Voltage Minimization for Reliable Nanoscale SRAMs”, in Solid State Circuits Technologies, INTECH, 2010.
, “A Sub-Threshold FPGA with Low-Swing Dual-VDD Interconnect in 90nm CMOS”, in Custom Integrated Circuits Conference (CICC), 2010.
, “System Design Principles Combining Sub-threshold Circuits and Architectures with Energy Scavening Mechanisms”, in International Symposium on Circuits and Systems (ISCAS), Paris, France, 2010, pp. 269-272.
, “Two Fast Methods for Estimating the Minimum Standby Supply Voltage for Large SRAMs”, Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), vol. 29, pp. 1908-1920, 2010.
, “Virtual Prototyper (ViPro): An Early Design Space Exploration and Optimization Tool for SRAM Designers”, in Design Automation Conference (DAC), 2010, pp. 138-143.
,