Publications
Export 325 results:
Author [ Title] Type Year Filters: First Letter Of Last Name is C [Clear All Filters]
“An 8.3 nW -72 dBm Event Driven IoE Wake Up Receiver RF Front End”, in 2017 European Microwave Integrated Circuit Conference (EuMIC), Nuremberg, Germany, 2017.
, “An 8.3 nW -72 dBm Event Driven IoE Wake Up Receiver RF Front End”, in 2017 European Microwave Integrated Circuit Conference (EuMIC), Nuremberg, Germany, 2017.
, “An 85 nW IoT Node-Controlling SoC for MELs Power-Mode Management and Phantom Energy Reduction”, in 2020 IEEE International Symposium on Circuits and Systems (ISCAS), 2020.
, “An 88.6nW Ozone Pollutant Sensing Interface IC with a 159 dB Dynamic Range”, in ACM/IEEE International Symposium on Low Power Electronics and Design (ISLPED), 2020.
, “A 90nm Data Flow Processor Demonstrating Fine Grained DVS for Energy Efficient Operation from 0.25V to 1.2V”, in Custom Integrated Circuits Conference, San Jose, 2011.
, “A 90nm Data Flow Processor Demonstrating Fine Grained DVS for Energy Efficient Operation from 0.25V to 1.2V”, in Custom Integrated Circuits Conference, San Jose, 2011.
, “A 956pW Switched-Capacitor Sub-Bandgap Reference with 0.44-to-3.3V Supply Range, -67dB PSRR, and 0.2% within-Wafer Inaccuracy for Nanowatt IoT Systems”, in 2022 IEEE European Solid-State Circuits Conference (ESSCIRC), 2022.
, “Analysis and Design of an Ultra-Low-Power Bluetooth Low-Energy Transmitter With Ring Oscillator-Based ADPLL and 4 Frequency Edge Combiner”, IEEE Journal of Solid-State Circuits, 2019.
, “Analysis and Design of an Ultra-Low-Power Bluetooth Low-Energy Transmitter With Ring Oscillator-Based ADPLL and 4 Frequency Edge Combiner”, IEEE Journal of Solid-State Circuits, 2019.
, “An Analytical Model for Performance Yield of Nanoscale SRAM Accounting for the Sense Amplifier Strobe Signal”, in Internation Symposium on Lower Power Electronics and Design (ISLPED), 2011.
, “Analyzing and Modeling Process Balance for Sub-threshold Circuit Design”, in GLSVLSI, 2007, pp. 275-280.
, “Analyzing Static and Dynamic Write Margin for Nanometer SRAMs”, in International Symposium on Low Power Electronics and Design, 2008, pp. 129-134.
, “Analyzing Static Noise Margin for Sub-threshold SRAM in 65nm CMOS”, in European Solid-State Circuits Conference, 2005, pp. 363-366.
, “Analyzing Static Noise Margin for Sub-threshold SRAM in 65nm CMOS”, in European Solid-State Circuits Conference, 2005, pp. 363-366.
, “Analyzing Sub-Threshold Bitcell Topologies and the Effects of Assist Methods on SRAM Vmin”, Journal of Low Power Electronics and Applications, 2012.
, “Analyzing Sub-Threshold Bitcell Topologies and the Effects of Assist Methods on SRAM VMIN”, Journal of Low Power Electronics and Applications (JLPEA), vol. 2, p. 12, 2012.
, , “Application-Driven Model of a PPG Sensing Modality for the Informed Design of Self-Powered, Wearable Healthcare Systems”, in 2020 IEEE International Symposium on Circuits and Systems (ISCAS), 2020.
, “Asymmetric 6T SRAM with Two-phase Write and Split Bitline Differential Sensing for Low Voltage Operation”, in ISQED, 2010, pp. 139-146.
, “Asymmetric 6T SRAM with Two-phase Write and Split Bitline Differential Sensing for Low Voltage Operation”, in ISQED, 2010, pp. 139-146.
, “Asymmetric Sizing in a 45nm 5T SRAM to Improve Read Stability over 6T”, in CICC, 2009, pp. 709-712.
, “AuxcellGen: A Framework for Autonomous Generation of Analog and Memory Unit Cells”, in Design, Automation and Test in Europe Conference (DATE), 2023, 2023. AuxcellGen-A Framework for Autonomous Generation of Analog and Memory Unit Cells.pdf (3.37 MB)
, “A Batteryless 19 uW MICS/ISM-Band Energy Harvesting Body Sensor Node SoC for ExG Applications”, Journal of Solid State Circuits, vol. 48, pp. 199-213, 2013.
, “A Batteryless 19 uW MICS/ISM-Band Energy Harvesting Body Sensor Node SoC for ExG Applications”, Journal of Solid State Circuits, vol. 48, pp. 199-213, 2013.
, “A Batteryless 19uW MICS/ISM-Band Energy Harvesting Body Area Sensor Node SoC”, in ISSCC, San Francisco, 2012.
,