Publications
Export 169 results:
Author Title [ Type
] Year Filters: Author is Benton H. Calhoun [Clear All Filters]
, “Characterizing and Modeling Minimum Energy Operation for Subthreshold Circuits”, in International Symposium on Low Power Electronics and Design, 2004, pp. 90-95.
, “Combining SRAM Read/Write Assist Techniques for Near/Sub-Threshold Voltage Operation”, in 6th Asia Symposium on Quality Electronic Design (ASQED 2015), Kuala Lumpur, Malaysia, 2015.
, “A Crystal-Less BLE Transmitter with -86dBm Frequency-Hopping Back-Channel WRX and Over-the-Air Clock Recovery from a GFSK-Modulated BLE Packet”, in 2020 IEEE International Solid-State Circuits Conference (ISSCC), 2020.
, “Dark vs. Dim Silicon and Near-Threshold Computing”, in Dark Silicon Workshop (DaSi), 2012.
, “Design Considerations for Next Generation Wireless Power-Aware Microsensor Nodes”, in International Conference on VLSI Design, 2004, pp. 361-367.
, “Design Methodology for Fine-Grained Leakage Control in MTCMOS”, in International Symposium on Low Power Electronics and Design (ISLPED), 2003, pp. 104-109.
, “Device Sizing for Minimum Energy Operation in Subthreshold Circuits”, in Custom Integrated Circuits Conference (CICC), 2004, pp. 95-98.
, “A Digital Dynamic Write Margin Sensor for Low Power Read/Write Operations in 28nm SRAM”, in ISLPED, 2014.
, “A Double Pumped Single-Line-Cache SRAM Architecture for Ultra-low Energy IoT and Machine Learning Applications”, in 32nd International Conference on VLSI Design, 2019.
, “Energy-Efficient Link Layer for Wireless Microsensor Networks”, in IEEE Computer Society Workshop on VLSI, 2001, pp. 16-21.
, “An Energy-Efficient Near/Sub-Threshold FPGA Interconnect Architecture Using Dynamic Voltage Scaling and Power-Gating”, in International Conference on Field-Programmable Technology (ICFPT 2016), Xi’an, China, 2016.
, “An Enhanced Adaptive Canary System for SRAM Standby Power Reduction”, in TECHCON, 2008.
, “Exploiting Dynamically Changing Parallelism with a Reconfigurable Array of Homogeneous Sub-cores”, in TECHCON, 2010.
, “FAR: A 4.12uW Ferro-electric Auto-Recovery for Battery-less BSN SoCs”, in 2017 IEEE Biomedical Circuits and Systems Conference (BioCAS), Turin, Italy, 2017.
, “Flow-induced Vibrations of Pinniped Vibrissae: Effects of Angular Orientation and Implications for Hydrodynamic Reception”, in Conference on the Biology of Marine Mammals, 2011.
, “A Fully Integrated, Custom End-to-End PPG Sensing System for Ultra-Low Power Wearables”, in 2025 IEEE International Symposium on Circuits and Systems (ISCAS), In Press.
, “Graph Coloring using Coupled Oscillator-based Dynamical Systems”, in 2021 IEEE International Symposium on Circuits and Systems (ISCAS), 2021.
, “Hold Time Closure for Subthreshold Circuits Using a Two-Phase, Latch Based Timing Method”, in S3S Conference, Monterey, California, 2013.
, “Improving Dynamic Leakage Suppression Logic with Forward Body Bias in 65nm CMOS”, in IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), 2019.
, “Improving Reliability and Energy Requirements of Memory in Body Sensor Networks.”, in International Conference on VLSI Design, Kolkata, India, 2016.
, “An Integrated 2.4GHz -91.5dBm Sensitivity Within-Packet Duty-Cycled Wake-Up Receiver Achieving 2μW at 100ms Latency”, in IEEE International Solid-State Circuits Conference (ISSCC), San Francisco, CA (*Equally-Credited Authors), 2021.
, “ISPI: A 2-Wire Improved Serial Peripheral Interface with Automatic Routing Algorithm for 2-D In-Textile Distributed Computing and Storage Systems”, in 2025 IEEE Custom Integrated Circuits Conference (CICC) , In Press.
, “MemGen: An Open-Source Framework for Autonomous Generation of Memory Macros”, in IEEE Custom Integrated Circuits Conference (CICC), 2021.
kamineni2021.pdf (9.26 MB)
kamineni2021.pdf (9.26 MB), “Micropower Wireless Sensors”, in NSTI Nanotech, 2006, vol. 3, pp. 459-462.
, “Minimizing Offset for Latching Voltage-Mode Sense Amplifiers for Sub-threshold Operation”, in International Symposium on Quality Electronic Design, 2008, pp. 127-132.