Publications
Export 336 results:
Author [ Title
] Type Year Filters: First Letter Of Last Name is C [Clear All Filters]
, “A 2.5 ppm/°C 1.05 MHz Relaxation Oscillator with Dynamic Frequency-Error Compensation and Fast Start-Up Time”, IEEE Journal of Solid-State Circuits (JSSC), 2019.
, “A 2.4 GHz-91.5 dBm Sensitivity Within-Packet Duty-Cycled Wake-Up Receiver”, IEEE Journal of Solid-State Circuits, 2021.
, “A 236nW -56.5dBm Sensitivity Self-Powered Bluetooth Low-Energy Wakeup Receiver in 65nm CMOS”, in IEEE International Solid-State Circuits Conference (ISSCC), 2016.
, “A 236nW -56.5dBm Sensitivity Self-Powered Bluetooth Low-Energy Wakeup Receiver in 65nm CMOS”, in IEEE International Solid-State Circuits Conference (ISSCC), 2016.
, “A 2.3-5.7μW Tri-Modal Self-Adaptive Photoplethysmography Sensor Interface IC for Heart Rate, SpO2 , and Pulse Transit Time Co-Monitoring”, IEEE Transactions on Biomedical Circuits and Systems, 2024.
, “A 23 nW CMOS ultra-Low Power Temperature Sensor Operational from 0.2 V”, in IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference, Rohnert Park, CA, 2015.
, “A 1pJ/Bit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks”, in 2023 IEEE Biomedical Circuits and Systems Conference, 2023.
A 1pJbit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks.pdf (2.54 MB)
A 1pJbit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks.pdf (2.54 MB), “A 1pJ/Bit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks”, in 2023 IEEE Biomedical Circuits and Systems Conference, 2023. A 1pJbit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks.pdf (2.54 MB)
A 1pJbit Bypass-SPI Interconnect Bus with I2C Conversion Capability and 2.3nW Standby Power for Fabric Sensing Networks.pdf (2.54 MB), “A 194nW Energy-Performance-Aware IoT SoC Employing a 5.2nW 92.6% Peak Efficiency Power Management Unit for System Performance Scaling, Fast DVFS and Energy Minimization”, in IEEE International Solid-State Circuits Conference (ISSCC), 2022. A 194nW Energy-Performance-Aware IoT SoC Employing a 5.2nW 92.6% Peak Efficiency Power Management Unit for System Performance Scaling, Fa.pdf (4.4 MB)
A 194nW Energy-Performance-Aware IoT SoC Employing a 5.2nW 92.6% Peak Efficiency Power Management Unit for System Performance Scaling, Fa.pdf (4.4 MB), “A 184 nW, -78.3 dBm Sensitivity Antenna-Coupled Supply, Temperature, and Interference-Robust Wake-up Receiver at 4.9 GHz”, IEEE Transactions on Microwave Theory and Techniques, 2022.
, “A 1.5nW, 32.768kHz XTAL Oscillator Operational from 0.3V Supply”, IEEE Journal of Solid-State Circuits (JSSC), vol. 51, 2016.
, “A 150nW, 5ppm/oC, 100kHz On-Chip Clock Source for Ultra Low Power SoCs”, in Custom Integrated Circuits Conference, San Jose, 2012.
, “A 145mV to 1.2V Single Ended Level Converter Circuit for Ultra-Low Power Low Voltage ICs”, in IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), 2015.
, “A 1.3μW, 5pJ/cycle sub-threshold MSP430 processor in 90nm xLP FDSOI for energy-efficient IoT applications”, in International Symposium on Quality Electronic Design (ISQED), Santa Clara, CA, 2016.
, “A 130nm Canary SRAM for SRAM Dynamic Write VMIN Tracking across Voltage, Frequency, and Temperature Variations”, in Custom Integrated Circuits Conference (CICC), San Jose, CA, 2015.
, “A 1.2μW SIMO Energy Harvesting and Power Management Unit with Constant Peak Inductor Current Control Achieving 83-92% Efficiency Across Wide Input and Output Voltages”, in Symposium on VLSI Circuits, 2014.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting with 220mV Cold-Start and -14.5dBm, 915MHz RF Kick-Start”, IEEE Journal of Solid-State Circuits (JSSC), vol. 50, pp. 1820-1832, 2015.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric Energy Harvesting”, in IEEE Custom Integrated Circuits Conference (CICC), 2014.
, “A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub-μW Robust Wearable Sensing”, IEEE Transactions on Biomedical Circuits and Systems, vol. 18, no. 4, 2024.
, “A 10-Channel, 1.2 µW, Reconfigurable Capacitanceto-Digital Converter for Low-Power, Wearable Healthcare Applications”, in 2023 IEEE Biomedical Circuits and Systems Conference, 2023.
, “A -108dBm Sensitivity, -28dB SIR, 130nW to 41μW, Digitally Reconfigurable Bit-Level Duty-Cycled Wakeup and Data Receiver”, in IEEE Custom Integrated Circuits Conference (CICC), 2020.
, “A -106dBm 33nW Bit-Level Duty-Cycled Tuned RF Wake-up Receiver”, in 2019 Symposium on VLSI Circuits, Kyoto, Japan, 2019.
, “A -102dBm Sensitivity, 2.2µA Packet-Level-Duty-cycled Wake-Up Receiver with ADPLL achieving -30dB SIR”, in IEEE Custom Integrated Circuits Conference (CICC), 2023.
, “A 1.02 μW Battery-Less, Continuous Sensing and Post-Processing SiP for Wearable Applications”, IEEE Transactions on Biomedical Circuits and Systems, 2019. 08625544.pdf (3.22 MB)
08625544.pdf (3.22 MB), “A 1.02 μW Battery-Less, Continuous Sensing and Post-Processing SiP for Wearable Applications”, IEEE Transactions on Biomedical Circuits and Systems, 2019. 08625544.pdf (3.22 MB)
08625544.pdf (3.22 MB)