Publications
] , “Analyzing Sub-Threshold Bitcell Topologies and the Effects of Assist Methods on SRAM Vmin”, Journal of Low Power Electronics and Applications, 2012.
, “Analyzing Sub-Threshold Bitcell Topologies and the Effects of Assist Methods on SRAM VMIN”, Journal of Low Power Electronics and Applications (JLPEA), vol. 2, p. 12, 2012.
, “A Custom Processor for Node and Power Management of a Battery-less Body Sensor Node in 130nm CMOS”, Custom Integrated Circuits Conference. San Jose, 2012.
, “Tracking On-Chip Age Using Distributed, Embedded Sensors”, Transactions on VLSI Systems (TVLSI), vol. 20, p. 12, 2012.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric Energy Harvesting”, in IEEE Custom Integrated Circuits Conference (CICC), 2014.
, “A 1.2μW SIMO Energy Harvesting and Power Management Unit with Constant Peak Inductor Current Control Achieving 83-92% Efficiency Across Wide Input and Output Voltages”, in Symposium on VLSI Circuits, 2014.
, “39 fJ/bit On-Chip Identification of Wireless Sensors Based on Manufacturing Variation”, Journal of Low Power Electronics and Applications (JLPEA), vol. 4, p. 16, 2014.
, “Fast, Accurate Variation-Aware Path Timing Computation for Sub-threshold Circuits”, in International Symposium on Quality Electronic Design (ISQED), 2014.
, “Flexibility and Circuit Overheads in Reconfigurable SIMD/MIMD Systems”, in International Symposium on Field-Programmable Custom Computing Machines (FCCM), 2014.
, “LEDRA: A 3DIC Ultra-Low Power FPGA Architecture for DoD Applications”, in GOMAC Tech, 2014.
, “Modeling SRAM Dynamic VMIN”, in International Conference on IC Design and Technology (ICICDT), 2014.
, “Pipelined Non-Strobed Sensing Scheme for Lowering BL Swing in Nano-scale Memories”, in VLSI Design Conference, 2014.
, “A Reduced-Memory FIR Filter Using Approximate Coefficients for Ultra-Low Power SoCs”, in S3S Conference, Monterey, CA, 2014.
, “A Reverse Write Assist Circuit for SRAM Dynamic Write VMIN Tracking using Canary SRAMs”, in International Symposium on Quality Electronic Design (ISQED), 2014.
, “Self Calibrated Dynamic Write Margin Sensor for Low Power Read/Write Operations in Sub-32nm SRAM”, in Design Automation Conference (DAC), 2014.
, “An Ultra-Low Energy Subthreshold SRAM Bitcell for Energy Constrained Biomedical Applications”, Journal of Low Power Electronics and Applications (JLPEA), vol. 4, p. 19, 2014.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting with 220mV Cold-Start and -14.5dBm, 915MHz RF Kick-Start”, IEEE Journal of Solid-State Circuits (JSSC), vol. 50, pp. 1820-1832, 2015.
, “A 145mV to 1.2V Single Ended Level Converter Circuit for Ultra-Low Power Low Voltage ICs”, in IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), 2015.
, “A 32nW Bandgap Reference Voltage Operational from 0.5V Supply for Ultra-low Power Systems”, in EEE International Solid-State Circuits Conference (ISSCC), 2015.
, “Error-Energy Analysis of Hardware Logarithmic Approximation Methods for Low Power Applications”, in International Symposium on Circuits and Systems (ISCAS), 2015.
, “Stack Based Sense Amplifier Designs for Reducing Input-Referred Offset”, in International Symposium on Quality Electronic Design, 2015.
, “Ultra Low Power Circuits and Systems for Self Powered Wireless Sensors”, in GOMACTech, 2015.
, “Ultra-Low Power Wireless SoCs Enabling a Batteryless IoT”, in HOT Chips, 2015.
, “A 0.2 V, 23 nW CMOS Temperature Sensor for Ultra-Low-Power IoT Applications”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
, “A 1.5nW, 32.768kHz XTAL Oscillator Operational from 0.3V Supply”, IEEE Journal of Solid-State Circuits (JSSC), vol. 51, 2016.