Publications
Export 80 results:
Author Title [ Type] Year Filters: First Letter Of Last Name is W [Clear All Filters]
“A 2.3-5.7μW Tri-Modal Self-Adaptive Photoplethysmography Sensor Interface IC for Heart Rate, SpO2 , and Pulse Transit Time Co-Monitoring”, IEEE Transactions on Biomedical Circuits and Systems, 2024.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting with 220mV Cold-Start and -14.5dBm, 915MHz RF Kick-Start”, IEEE Journal of Solid-State Circuits (JSSC), vol. 50, pp. 1820-1832, 2015.
, “A 1.02 μW Battery-Less, Continuous Sensing and Post-Processing SiP for Wearable Applications”, IEEE Transactions on Biomedical Circuits and Systems, 2019. 08625544.pdf (3.22 MB)
, “A 0.6V 785-nW Multimodal Sensor Interface IC for Ozone Pollutant Sensing and Correlated Cardiovascular Disease Monitoring”, IEEE Journal of Solid-State Circuits, 2021.
, “A 0.5 V 68 nW ECG Monitoring Analog Front-End for Arrhythmia Diagnosis”, Journal of Low Power Electronics and Applications (JLPEA), 2018.
, “Fully Autonomous Mixed Signal SoC Design & Layout Generation Platform”, IEEE Hot Chips 32 Symposium (HCS). 2020.
, “Ultra-Low Power Wireless SoCs Enabling a Batteryless IoT”, in HOT Chips, 2015.
, “Ultra-Dynamic Voltage Scaling for Energy Starved Electronics”, in Proc. of GOMAC Tech, 2007.
, “Ultra Low Power Circuits and Systems for Self Powered Wireless Sensors”, in GOMACTech, 2015.
, “Ultra Low Power Circuits and Systems for Self Powered Wireless Sensors”, in GOMACTech, 2015.
, “Sub-threshold Operation and Cross-Hierarchy Design for Ultra Low Power Wearable Sensors”, in International Symposium on Circuits and Systems, 2009.
, “Sub-threshold Design: The Challenges of Minimizing Circuit Energy”, in International Symposium on Low Power Electronics and Design (ISLPED), 2006, pp. 366-368.
, “Sub-threshold Circuit Design with Shrinking CMOS Devices”, in International Symposium on Circuits and Systems, 2009.
, “Statistical Modeling for the Minimum Standby Supply Voltage of a Full SRAM Array”, in European Solid State Circuits Conference (ESSCIRC), 2007, pp. 400-403.
, “SRAM-Based NBTI/PBTI Sensor System Design”, in Design Automation Conference (DAC), San Diego, CA, 2010, pp. 849-852.
, “A Self-Powered SoC with Distributed Cooperative Energy Harvesting and Multi-Chip Power Management for System-in-Fiber”, in IEEE International Solid-State Circuits Conference (ISSCC), 2023. 15.1_A_Self-Powered_SoC_with_Distributed_Cooperative_Energy_Harvesting_and_Multi-Chip_Power_Management_for_System-in-Fiber.pdf (1.51 MB)
, “Recursive Statistical Blockade: An Enhanced Technique for Rare Event Simulation with Application to SRAM Circuit Design”, in International Conference on VLSI Design, India, 2008, pp. 131-136.
, “An Open-source Framework for Autonomous SoC Design with Analog Block Generation”, in 28th IFIP/IEEE International Conference on Very Large Scale Integration, Salt Lake City, UT, USA. (Nominated for Best Paper Award), 2020.
, “MSN: Memory Sensor for NBTI”, in Techcon, 2009.
, “Modeling Energy-Aware Photoplethysmography Hardware for Personalized Health Care Applications Across Skin Phototypes”, in IEEE Biomedical Circuits and Systems Conference (BioCAS), 2021.
, “Mobile Health Monitoring Through Biotelemetry”, in Bodynets, 2009.
, “A Low Power Bluetooth Low-Energy Transmitter with a 10.5nJ Startup-Energy Crystal Oscillator”, in IEEE European Solid-State Circuits Conference (ESSCIRC), Cracow, Poland, 2019.
, “Lighting IoT Test Environment (LITE) Platform: Evaluating Light-Powered, Energy HarvestingEmbedded Systems”, in Global Internet of Things Summit (GIoTS), 2018.
, “Improving SRAM Vmin and Yield by Using Variation-Aware BTI Stress”, in CICC, San Jose, CA, 2010.
, “Flexibility and Circuit Overheads in Reconfigurable SIMD/MIMD Systems”, in International Symposium on Field-Programmable Custom Computing Machines (FCCM), 2014.
,