Robust Low Power VLSI
VLSI Design Group

Navigation

Search This Site

Publications

Export 60 results:
Author [ Title(Desc)] Type Year
Filters: Author is B. H. Calhoun  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
D
Y. Huang, Shrivastava, A., Barnes, L., and Calhoun, B. H., “A Design and Theoretical Analysis of a 145 mV to 1.2 V Single-Ended Level Converter Circuit for Ultra-Low Power Low Voltage ICs”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
N. Liu and Calhoun, B. H., “Design Optimization of Register File Throughput and Energy using a Virtual Prototyping (ViPro) Tool”, in IEEE Computer Society Annual Symposium on VLSI (ISVLSI), 2016.
W. Eberhardt, Wakefield, B., Casey, C., Murphy, C., Calhoun, B. H., and Reichmuth, C., “Development of an artificial sensor for hydrodynamic detection inspired by a seal’s whisker array”, Bioinspiration and Biomimetics, 2016.
S. Nalam, Chandra, V., Aitken, R. C., and Calhoun, B. H., “Dynamic Write Limited Minimum Operating Voltage for Nanoscale SRAM”, in Design Automation and Test Europe (DATE), 2011.
E
A. Klinefelter, Ryan, J., Tschanz, J., and Calhoun, B. H., “Error-Energy Analysis of Hardware Logarithmic Approximation Methods for Low Power Applications”, in International Symposium on Circuits and Systems (ISCAS), 2015.
F
Y. Zhang and Calhoun, B. H., “Fast, Accurate Variation-Aware Path Timing Computation for Sub-threshold Circuits”, in International Symposium on Quality Electronic Design (ISQED), 2014.
S. Arrabi, Moore, D., Wang, L., Skadron, K., and Calhoun, B. H., “Flexibility and Circuit Overheads in Reconfigurable SIMD/MIMD Systems”, in International Symposium on Field-Programmable Custom Computing Machines (FCCM), 2014.
I
R. W. Mann, Wang, J., Nalam, S., Khanna, S., Braceras, G., Pilo, H., and Calhoun, B. H., “Impact of circuit assist methods on margin and performance in 6T SRAM”, Journal of Solid State Electronics, vol. 54, pp. 1398-1407, 2010.
J. Wang, Nalam, S., Qi, J., Mann, R. W., Stan, M., and Calhoun, B. H., “Improving SRAM Vmin and Yield by Using Variation-Aware BTI Stress”, in CICC, San Jose, CA, 2010.
L
J. J. Granacki, Calhoun, B. H., Dasu, A. R., Jagasivamani, M., McIlrath, L., and Fritze, M., “LEDRA: A 3DIC Ultra-Low Power FPGA Architecture for DoD Applications”, in GOMAC Tech, 2014.
M
J. Wang and Calhoun, B. H., “Minimum Supply Voltage and Yield Estimation for Large SRAMs Under Parametric Variations”, Transactions on VLSI Systems (TVLSI), 2011.
D. Kamakshi, Fojtik, M., Khailany, B., Kudva, S., Zhou, Y., and Calhoun, B. H., “Modeling and Analysis of Power Supply Noise Tolerance with Fine-grained GALS Adaptive Clocks”, in ASYNC, 2016.
J. Boley, Chandra, V., Aitken, R., and Calhoun, B. H., “Modeling SRAM Dynamic VMIN”, in International Conference on IC Design and Technology (ICICDT), 2014.
N
R. W. Mann, Hook, T. B., Nguyen, P., and Calhoun, B. H., “Non-Random Device Mismatch Considerations in Nanoscale SRAM”, IEEE Transactions of VLSI Systems (TVLSI), 2011.
P
S. Khanna, Nalam, S. V., and Calhoun, B. H., “Pipelined Non-Strobed Sensing Scheme for Lowering BL Swing in Nano-scale Memories”, in VLSI Design Conference, 2014.
A. M. Klinefelter and Calhoun, B. H., “A Programmable Multi-channel Sub-threshold FIR Filter for a Body Area Sensor Node”. 2011.
R
A. Klinefelter and Calhoun, B. H., “A Reduced-Memory FIR Filter Using Approximate Coefficients for Ultra-Low Power SoCs”, in S3S Conference, Monterey, CA, 2014.
B. H. Meyer, Skadron, K., George, N., Calhoun, B. H., and Lach, J., “Reducing the Cost of Redundant Execution in Safety-Critical Systems using Relaxed Dedication”, in Design Automation and Test in Europe (DATE), 2011.
B. H. Calhoun, Arrabi, S., Khanna, S., Shakhsheer, Y., Craig, K., Ryan, J., and Lach, J., “REESES: Rapid Efficient Energy Scalable ElectronicS”, in GOMAC Tech, 2010.
A. Banerjee, Sinangil, M., Poulton, J., Gray, C. T., and Calhoun, B. H., “A Reverse Write Assist Circuit for SRAM Dynamic Write VMIN Tracking using Canary SRAMs”, in International Symposium on Quality Electronic Design (ISQED), 2014.
S
P. Beshay, Chandra, V., Aitken, R., and Calhoun, B. H., “Self Calibrated Dynamic Write Margin Sensor for Low Power Read/Write Operations in Sub-32nm SRAM”, in Design Automation Conference (DAC), 2014.
M. Bhargava, Nalam, S., Calhoun, B. H., and Mai, K., “An SRAM Prototyping Tool for Rapid Sub-32nm Design Exploration and Optimization”, in TECHCON, 2009.
J. Boley and Calhoun, B. H., “Stack Based Sense Amplifier Designs for Reducing Input-Referred Offset”, in International Symposium on Quality Electronic Design, 2015.
Y. Yu, Huang, J., Khanna, S., Calhoun, B. H., Lach, J., Shelat, A., and Evans, D., “A Sub-0.5V Lattice-Based Public-Key Encryption Scheme for RFID Platforms in 130nm”. 2011 Workshop on RFID Security, 2011.
F. Yahya, Patel, H., Boley, J., Banerjee, A., and Calhoun, B. H., “A Sub-threshold 8T SRAM Macro with 12.29nW/KB Standby Power and 6.24 pJ/access for Battery-Less IoT SoCs”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.

Pages