Publications
] , “A 256kb 6T self-tuning SRAM with extended 0.38V–1.2V operating range using multiple read/write assists and VMIN tracking canary sensors”, in 2017 IEEE Custom Integrated Circuits Conference (CICC), Austin, TX, 2017, 2017.
, “A 0.2 V, 23 nW CMOS Temperature Sensor for Ultra-Low-Power IoT Applications”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
, “A 1.5nW, 32.768kHz XTAL Oscillator Operational from 0.3V Supply”, IEEE Journal of Solid-State Circuits (JSSC), vol. 51, 2016.
, “A 236nW -56.5dBm Sensitivity Self-Powered Bluetooth Low-Energy Wakeup Receiver in 65nm CMOS”, in IEEE International Solid-State Circuits Conference (ISSCC), 2016.
, “A 36nW, 7 ppm/oC Fully On-Chip Clock Source System for Ultra-Low Power Applications”, Journal of Low Power Electronics and Applications (JLPEA), vol. 6, 2016.
, “A 55nm Ultra Low Leakage Deeply Depleted Channel Technology Optimized for Energy Minimization in Subthreshold SRAM and Logic”, in European Solid State Circuits Conference (ESSCIRC), 2016.
, “A Design and Theoretical Analysis of a 145 mV to 1.2 V Single-Ended Level Converter Circuit for Ultra-Low Power Low Voltage ICs”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
, “Design Optimization of Register File Throughput and Energy using a Virtual Prototyping (ViPro) Tool”, in IEEE Computer Society Annual Symposium on VLSI (ISVLSI), 2016.
, “Development of an artificial sensor for hydrodynamic detection inspired by a seal’s whisker array”, Bioinspiration and Biomimetics, 2016.
, “Modeling and Analysis of Power Supply Noise Tolerance with Fine-grained GALS Adaptive Clocks”, in ASYNC, 2016.
, “A Sub-threshold 8T SRAM Macro with 12.29nW/KB Standby Power and 6.24 pJ/access for Battery-Less IoT SoCs”, J. Low Power Electron. Appl. (JLPEA), vol. 6, 2016.
, “A Tunnel FET Design for High-Current, 120 mV Operation”, in IEDM, 2016.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting with 220mV Cold-Start and -14.5dBm, 915MHz RF Kick-Start”, IEEE Journal of Solid-State Circuits (JSSC), vol. 50, pp. 1820-1832, 2015.
, “A 145mV to 1.2V Single Ended Level Converter Circuit for Ultra-Low Power Low Voltage ICs”, in IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), 2015.
, “A 32nW Bandgap Reference Voltage Operational from 0.5V Supply for Ultra-low Power Systems”, in EEE International Solid-State Circuits Conference (ISSCC), 2015.
, “Error-Energy Analysis of Hardware Logarithmic Approximation Methods for Low Power Applications”, in International Symposium on Circuits and Systems (ISCAS), 2015.
, “Stack Based Sense Amplifier Designs for Reducing Input-Referred Offset”, in International Symposium on Quality Electronic Design, 2015.
, “Ultra Low Power Circuits and Systems for Self Powered Wireless Sensors”, in GOMACTech, 2015.
, “Ultra-Low Power Wireless SoCs Enabling a Batteryless IoT”, in HOT Chips, 2015.
, “A 10mV-Input Boost Converter with Inductor Peak Current Control and Zero Detection for Thermoelectric Energy Harvesting”, in IEEE Custom Integrated Circuits Conference (CICC), 2014.
, “A 1.2μW SIMO Energy Harvesting and Power Management Unit with Constant Peak Inductor Current Control Achieving 83-92% Efficiency Across Wide Input and Output Voltages”, in Symposium on VLSI Circuits, 2014.
, “39 fJ/bit On-Chip Identification of Wireless Sensors Based on Manufacturing Variation”, Journal of Low Power Electronics and Applications (JLPEA), vol. 4, p. 16, 2014.
, “Fast, Accurate Variation-Aware Path Timing Computation for Sub-threshold Circuits”, in International Symposium on Quality Electronic Design (ISQED), 2014.
, “Flexibility and Circuit Overheads in Reconfigurable SIMD/MIMD Systems”, in International Symposium on Field-Programmable Custom Computing Machines (FCCM), 2014.
, “LEDRA: A 3DIC Ultra-Low Power FPGA Architecture for DoD Applications”, in GOMAC Tech, 2014.