Robust Low Power VLSI
VLSI Design Group

Navigation

Search This Site

Publications

Export 258 results:
[ Author(Desc)] Title Type Year
Filters: Filter is   [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
M
A. Mallick, Bashar, M. K., Truesdell, D. S., Calhoun, B. H., Joshi, S., and Shukla, N., “Using synchronized oscillators to compute the maximum independent set”, Nature Communications, 2020.
A. Mallick, Bashar, M. Khairul, Truesdell, D. S., Calhoun, B. H., Joshi, S., and Shukla, N., “Graph Coloring using Coupled Oscillator-based Dynamical Systems”, in 2021 IEEE International Symposium on Circuits and Systems (ISCAS), 2021.
R. W. Mann, Wang, J., Nalam, S., Khanna, S., Braceras, G., Pilo, H., and Calhoun, B. H., “Impact of circuit assist methods on margin and performance in 6T SRAM”, Journal of Solid State Electronics, vol. 54, pp. 1398-1407, 2010.
R. W. Mann, Hook, T. B., Nguyen, P., and Calhoun, B. H., “Non-Random Device Mismatch Considerations in Nanoscale SRAM”, IEEE Transactions of VLSI Systems (TVLSI), 2011.
R. Mann and Calhoun, B., “New category of ultra-thin notchless 6T SRAM cell layout topologies for sub-22nm”, in ISQED, 2011.
B. H. Meyer, Calhoun, B. H., Lach, J. C., and Skadron, K., “Cost-effective Safety and Fault Localization using Distributed Temporal Redundancy”, CASES. 2011.
B. H. Meyer, Skadron, K., George, N., Calhoun, B. H., and Lach, J., “Reducing the Cost of Redundant Execution in Safety-Critical Systems using Relaxed Dedication”, in Design Automation and Test in Europe (DATE), 2011.
V. Misra, Bozkurt, A., Calhoun, B., Jackson, T., Jur, J., Lach, J., Lee, B., Muth, J., Oralkan, O., Ozturk, M., Trolier-McKinstry, S., Vashaee, D., Wentzloff, D., and Zhu, Y., “Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing”, Proceedings of the IEEE, vol. 103, pp. 665-681, 2015.
J. Moody, Dissanayake, A., Bishop, H., Lu, R., Liu, N. X., Duvvuri, D., Gao, A., Truesdell, D. S., N. Barker, S., Gong, S., Calhoun, B. H., and Bowers, S. M., “A -106dBm 33nW Bit-Level Duty-Cycled Tuned RF Wake-up Receiver”, in 2019 Symposium on VLSI Circuits, Kyoto, Japan, 2019.
J. Moody, Bassirian, P., Roy, A., Feng, Y., Li, S., Costanzo, R., N. Barker, S., Calhoun, B. H., and Bowers, S. M., “An 8.3 nW -72 dBm Event Driven IoE Wake Up Receiver RF Front End”, in 2017 European Microwave Integrated Circuit Conference (EuMIC), Nuremberg, Germany, 2017.
J. Moody, Dissanayake, A., Bishop, H. L., Lu, R., Liu, N. X., Duvvuri, D., Gao, A., Truesdell, D. S., N. Barker, S., Gong, S., Calhoun, B. H., and Bowers, S. M., “A Highly Re-configurable Bit-level Duty Cycled TRF Receiver Achieving -106 dBm Sensitivity and 33 nW Average Power Consumption”, IEEE Solid-State Circuits Letters (SSCL), Special Issue on VLSI (invited paper), 2019.
J. Moody, Bassirian, P., Roy, A., Liu, N. X., N Barker, S., Calhoun, B. H., and Bowers, S. M., “Interference Robust Detector-First Near-Zero Power Wake-Up Receiver”, IEEE Journal of Solid-State Circuits, 2019.
J. Moody, Bassirian, P., Roy, A., Liu, N. X., Pancrazio, S., N. Barker, S., Calhoun, B. H., and Bowers, S. M., “A -76dBm 7.4 nW wakeup radio with automatic offset compensation”, in International Solid-State Circuits Conference (ISSCC), 2018.
C. T. Murphy, Eberhardt, W. C., Calhoun, B. H., Mann, K. A., and Mann, D. A., “Effect of Angle on Flow-Induced Vibrations of Pinniped Vibrissae”, PLOS One, vol. Vol. 8, No. 7, 2013.
C. T. Murphy, W. Eberhardt, C., Calhoun, B. H., and Mann, D. A., “Flow-induced Vibrations of Pinniped Vibrissae: Effects of Angular Orientation and Implications for Hydrodynamic Reception”, in Conference on the Biology of Marine Mammals, 2011.
N
S. Nalam, Bhargava, M., Ringgenberg, K., Mai, K., and Calhoun, B. H., “A Technology-Agnostic Simulation Environment (TASE) for Iterative Custom IC Design across Processes”, in ICCD, 2009, pp. 523-528.
S. Nalam, Chandra, V., Pietrzyk, C., Aitken, R. C., and Calhoun, B. H., “Asymmetric 6T SRAM with Two-phase Write and Split Bitline Differential Sensing for Low Voltage Operation”, in ISQED, 2010, pp. 139-146.
S. Nalam, Bhargava, M., Mai, K., and Calhoun, B. H., “Virtual Prototyper (ViPro): An Early Design Space Exploration and Optimization Tool for SRAM Designers”, in Design Automation Conference (DAC), 2010, pp. 138-143.
S. Nalam and Calhoun, B. H., “5T SRAM with Asymmetric Sizing for Improved Read Stability”, JSSC, 2011.
S. Nalam and Calhoun, B. H., “Asymmetric Sizing in a 45nm 5T SRAM to Improve Read Stability over 6T”, in CICC, 2009, pp. 709-712.
S. Nalam, Chandra, V., Aitken, R. C., and Calhoun, B. H., “Dynamic Write Limited Minimum Operating Voltage for Nanoscale SRAM”, in Design Automation and Test Europe (DATE), 2011.
O
N. Ownby, Flynn, K., and Calhoun, B. H., “Modeling Energy Aware Photoplethsmography for Personalized Healthcare Applications”, in IEEE Transactions on Biomedical Circuits and Systems, 2022.
N. Ownby, Singaraju, P., Bhattacharya, S., Calhoun, B. H., and Bowers, S. M., “A Sub-uW Digital Temperature Compensation Architecture for Arbitrary Voltage and Current Reference Generation”, in 2025 IEEE International Symposium on Circuits and Systems (ISCAS), In Press.
P
H. N. Patel, Roy, A., Yahya, F. B., Liu, N., Kumeno, K., Yasuda, M., Harada, A., Ema, T., and Calhoun, B. H., “A 55nm Ultra Low Leakage Deeply Depleted Channel Technology Optimized for Energy Minimization in Subthreshold SRAM and Logic”, in European Solid State Circuits Conference (ESSCIRC), 2016.
H. N. Patel, Yahya, F. B., and Calhoun, B. H., “Subthreshold SRAM: Challenges, Design Decisions, and Solutions”, in 60th IEEE International Midwest Symposium on Circuits and Systems, Boston, MA, USA, 2017.

Pages